Pages

Sunday, June 26, 2011

Master Bathroom Vanity Part 2

 Happy Sunday!
It's part 2 of the vanity re-do.  As of today we have it all done and are putting the final touches on the mirrors above the vanities.
Here's a few more of the steps we took to get to the final result.
After we beat them up and sanded them smooth again, I applied one coat of Minwax Dark Walnut stain, then lightly sanded it with a very fine sand paper.
 Look how the wood grain just pops and shows it's beauty!  I love the different variations in color!
 Then we tried the sink with it to see how it was going to look.....wonderful, that's how it looked!
Lastly I applied two coats of Minwax Polyurethane to seal the wood and guard against any water damage. We've since tried it out for "water-proof-ness" and it passes with flying colors.
After it cured for 24 hours, my honey installed the sink and faucet and then attached it to the cabinet that we also re-did.  More on those steps next week!

Master Vanity Part 1 - Click here.
Master Vanity Part 2 - Click here.
Master Vanity Part 3 - Click here. 
Master Vanity Part 4 - Click here.
Painting Our Cabinets - Click here.

It doesn't have to be done all at once.  It is a slow process in the works! C-ya next time!

9 comments:

  1. Great article on bathroom furniture, Nice pictures to support the article...

    ReplyDelete
  2. What type of wood did you use??

    ReplyDelete
  3. What type of wood did you use for the counter top?

    ReplyDelete
  4. Hi there! We used four (4) 2 x 6 boards. Look here:http://ourcloverhouse.blogspot.com/2011/06/heres-sneak-peek.html

    ReplyDelete
  5. My husband and I recently finished the bath house by our pool, I used your blog as inspiration for my vanity & top. I would love to share the finished product with you. Your advice and steps were exactly what I needed to have the confidence to make this happen!! Thanks!!

    ReplyDelete
    Replies
    1. Hi Nicole! Oh I would love to see it, yes!!! I'm so glad we could help you in your own DIY, isn't it fun? Thanks so much for your sweet comment! :)

      Delete
  6. I realize this is an old post so if you see this I have a question regarding the wood top. In a previous comment I explained I am making the same wood top. In my research I read 1 article that advised using biscuit jointer and glue. I was thinking just glue but they advised without biscuits high humidity will cause the wood to warp. In my research I have not found any other articles that substantiate biscuits are necessary. I don't want to invest in the tools required to join with biscuits. My project is now on the back burner till I can determine if it is necessary. Seeing your gorgeous vanity top makes me want to go forward with mine but I don't know how to proceed, hoping you can help. Did you use biscuits to join the wood planks in your vanity top? If not, have you had any issues with warping. P.S. I'm not knowledgeable about blogs so I followed your Pinterest cause I don't know how to follow your blog. I love the work you and your husband have done...Kudos to you both!

    ReplyDelete
    Replies
    1. Hi again Cindy! No, we did not use biscuits at all, just wood glue and wood screws, however, this is NOT a bathroom with high humidity. With that being said, my husband is not one to always tidy up the water spills he makes and so far we have not had any warping or any other problems with the wood or the finish.

      To follow our blog, simply scroll up the right hand side of the blog until you see "Don't miss a single post, follow us by email" and enter your email and you'll be notified every time I post something, OR, you can scroll all the way to the very bottom of the blog and follow us there.

      Good luck and thank you for your very kind comments!

      Delete

Thank you for visiting Clover House and taking the time to leave a comment! We LOVE comments and suggestions! Have a lovely day! :)